When an inspection report lists concerns and a contractor later gives you a repair price, it can feel like two competing opinions. They aren't. They answer different questions at different points in a sale, and knowing which is which keeps the deal moving.
An inspection answers: what is the condition?
A home inspection is a visual, non-invasive look at the accessible systems and components of a house. My job is to find visible defects, safety concerns, damage, aging materials and conditions that need repair, monitoring or a closer look by a specialist.
Every finding in my report says what I saw, where it is, why it matters and what to do about it. Findings are color-coded: blue for maintenance and minor items, orange for moderate concerns that should be repaired by a qualified contractor, and red for safety risks, major systems that aren't working properly and repairs with substantial cost. You can see how that looks in the sample report.
What the report doesn't do is price the repairs. I don't estimate repair costs. A condition can be documented accurately without guessing at a price before anyone has defined the work.
A contractor estimate answers: what will it cost?
A contractor estimate is a proposal for specific work. After looking at the condition, the contractor decides on the repair approach, labor, materials, access, permits where they apply, scheduling and price.
Two qualified contractors can recommend different repairs and give very different numbers. One roofer may suggest a localized repair while another thinks a larger replacement area makes more sense. A plumber may find that a leaking fixture needs a simple part, or may find damaged piping behind the wall once testing starts. The inspection identifies the concern. The contractor sets the scope and the cost.
An estimate can also change once work begins and hidden conditions come to light. That's common in older homes, where water damage, earlier repairs, wiring or plumbing can be hidden behind finished surfaces. A good contractor will tell you about those possibilities up front.
Why I don't give repair prices
Clients often want a number right away, especially in the middle of a transaction. I understand that. But a repair price without a contractor's own evaluation tends to create more confusion than it solves.
An inspection isn't destructive. I don't open walls, move furniture or dig. A contractor preparing to do the work may need to take measurements, test components, check access, choose materials and decide how the repair should be done. Price also depends on the contractor's schedule, the materials chosen and what turns up once the work starts. A quick verbal number from me is no substitute for a written estimate from the right trade.
I spent more than 25 years in construction in this region as a licensed general contractor, plumber and gas fitter, so I know how these repairs get done. That helps me describe a problem in terms a contractor can act on. I don't take on contracting work today, and I keep the inspection separate from the repair.
The best order: inspection first
In most cases the inspection comes first. It gives you the overall picture and tells you which professionals to call. Instead of bringing several contractors out to a property without a clear reason, you start with a focused list.
Say the inspection finds damaged roof covering, high moisture readings at an exterior wall and an older water heater showing deterioration. Those are three calls: a roofer, someone to track down the moisture source and a plumber. If a sewer scope shows roots, an offset or a damaged section, the plumber can work from the video and their own evaluation.
What to ask when you request an estimate
Share the photos and comments from the report so the contractor knows exactly which condition you're asking about, then ask them to explain the proposed work in plain language.
- Does the estimate fix the whole problem, or just the part that's visible?
- What materials are included?
- Are access and finish repairs, like drywall or paint, included?
- What could change the price?
- Does anything need further investigation before work starts?
For larger repairs, it's reasonable to get more than one estimate. The lowest number isn't automatically the best value, and the highest isn't automatically too much. Estimates that are far apart are often pricing different repairs, different materials or different assumptions about the problem.
For buyers: keep it in perspective
Thirty or more findings is normal, even on a well-kept home or a brand-new one. A long report doesn't mean a bad house. Start with the red and orange items. Blue items are for your maintenance list.
Estimates for the red and orange items put them in financial terms. With those in hand, you and your agent can decide whether to request repairs, ask for a credit and handle the work yourself, accept the item as is or, if the findings change the value of the purchase, walk away during the inspection period.
For sellers: inspect early
Many sellers wait for the buyer's inspection to find out what will come up in negotiations. A pre-listing inspection changes that. You get time to understand the issues, get estimates, make the repairs you choose and price and disclose the home with a plan.
Not every item needs fixing before you list. That depends on the condition, the market and your timeline. But hearing about a problem from me weeks ahead is much better than hearing about it from the buyer's agent in the middle of a deal.
Getting started
Every home inspection includes thermal imaging. The Complete package adds a sewer scope and the crawlspace drone when the home has an accessible crawlspace, and Total Confidence adds mold and air quality testing. I serve Clovis, Portales and Logan, and travel within 30 miles of Clovis is included.
I don't review findings on site. Your report arrives by the evening of the inspection or the next morning at the latest, and once you've read it you're welcome to call me with questions, including which kind of contractor to call for a particular item.
